Region +44 (0) 1903 731312

Watertec 40 Water Well Drilling Rig

The Watertec 40 water well drilling rig has been designed for drilling large diameter boreholes to great depths in some of the world’s most challenging environments.

A hugely successful deep water well drilling rig, the Watertec 40 has a lifting capacity of 40,000kgf, and the rig is favoured by large aid agencies, government departments and private contractors for deep borehole drilling projects worldwide.

Capable of most common water well drilling methods including conventional mud drilling and DTH hammer drilling, this model is also used for flooded reverse circulation drilling when the geology demands it, or when very large diameter boreholes are required.

Features include:

  • Pullback of 40,000 kgf
  • Capable of mud rotary, air and flooded reverse drilling
  • Various mounting options including 6×6 or 8×8 truck, or customer own support vehicle or structure
  • High torque rotary head with hydraulic side shift and head tilt
  • High pressure air/water swivel
  • Main winch for tools and casing
  • Auxiliary winch for tool handling
  • Selection of on-board air compressors
  • Selection of on-board mud pumps
  • Can be supplied with complete tooling packages
  • Onsite training available from Dando drilling engineers

*Please request a copy of our terms and conditions if required.

Download Brochure
CARRIER
Standard Heavy duty commercial 6 x 6 or 8 x 8 truck
Other Options Semi trailer
Customer own support vehicle/structure
DECK ENGINE
Type Caterpillar C15 570 HP diesel engine
Other options available
COMPRESSOR
Type Doosan XHP 1070. Other options available
Air Displacement 1070 CFM
Discharge Pressure 24.1 bar (350psi)
MAST CAPACITY
Pullback 40000 kgf (88185 lbf)
Pulldown 14000 kgf (30865 lbf)
Hook Load (Max) 40000 kgf (88185 lbf)
Working Stroke Main winch: 11800mm (464.6 inch)
Rotary head: 9000mm (354.3 inch)
BREAKOUT SYSTEM
Type Double acting hydraulic cylinder with adjustable wrench
Other options available
DRILL TABLE
Type Box type drill table with removable drill rod and casing guides
Other options Double breakout clamps available in various sizes
HYDRAULIC SYSTEM
Type Hydraulic power circuit based on load sensing hydraulic pumps and proportional control valves
Other Standard auxiliary hydraulic quick connect circuit for mud mixer or external pump
ROTARY HEAD
Rotation (Max) 140 rpm
Torque (Max) 15360 Nm (standard) 24000 Nm (high torque)
Features Rotary head tilt and side shift
Other options available
MAIN WINCH
Single Line Pull (1st Layer) 8000 kg (17637 lb)
Single Line Speed (1st Layer) 27 mpm (121 ft/min)
Cable Length/Drum Capacity (18mm) 83m (272 ft)
TOOL HANDLING WINCH
Single Line Pull (1st Layer) 2040 kg (4497.4 lb)
Single Line Speed (1st Layer) 31.5 mpm (103.3 ft/min)
Cable Length/Drum Capacity (10mm) 57m (187 ft)
MUD PUMP
Type Hydraulically driven 7-1/2” x 8” duplex pump. Other options available
Flow Rate (Max) 1590 lpm (420 US gpm)
Discharge Pressure (Max) 12.5 bar (182 psi)
FOAM PUMP
Type Hydraulically driven duplex pump
Flow Rate (Max) 34 lpm (9 US gpm)
Discharge Pressure (Max) 38 bar (550 psi)
LEVELLING JACKS
Type Two front and two rear levelling jacks with individual locking valves
LIGHTING AND ELECTRICAL SYSTEM
Lighting Control console lighting
Mast lighting
Electrical System 24 V
SAFETY FEATURES
Type 3 emergency stop buttons
Hydraulic system protection via relief valves and low level oil sensor
Option: Safety gate with interlock. Automatic decrease in head speed when opened
3-1/2" EU (16kg/m) drill rod 2000m (6562ft)
4-1/2" (23kg/m) drill rod 1391m (4564ft)

* Depths stated are theoretical and based on 80% capacity of the machine. Depths achieved will depend on variables including ground conditions and capability of crew operating the machine.

Watertec 40 - Mynamar

Mud rotary and DTH drilling with an NGO’s Watertec 40 in the Shan Region of Myanmar.


Watertec 40 set for Myanmar


Deep Water Well Drilling - Chad


Watertec 40s Supplied to the Nigerian Government


Large Diameter Borehole Drilling in Algeria


Watertec 40, UK


Watertec 40 Ready for Despatch to Iraq


Watertec 40 Supplied to Cost Rica


Join our newsletter