Dando 2500 Shell and Auger Rig
A geotechnical shell and auger drilling rig with a host of new safety features, including the economical and operationally safe Hatz soundproof engine. The D2500 has a single line pull capacity of 2500kg.
Engine Type: Hatz 2L41C. Engine has a 2:1 gearbox fitted.
Power: 19.3 Kw (25.9HP) @ 1870 RPM
Output Torque: 100Nm @ 1870 rpm
Max Derrick SWL: 7500kg
Winch Single Line Pull: 2500kg
Engine & Winch Unit (l x w x h): 2.51m x 1.44m x 1.38m
Mast Unit (l x w x h): 6.70m x 1.80m x 1.10m
Derrick working height under sheaves: 5.46m
Overall height derrick erected: 6.83m
Travelling dimensions (length): 8.45m
Drilling Depths and Diameters (16mm rope)
6 Inches (150mm): 60m
8 Inches (203mm): 40m
Silent engine pack
Improved winch guarding
Electric mast raising system
Emergency stop button
U4 (U100) and SPT
Simple to operate- good rates of production. Greater success in difficult, collapsing geological conditions.
Tough and long lasting- built to last for decades.
Tooling- rig packages can be supplied with a full range of tools including bits,casing, rods etc. All packages are tailored to suit your needs.
Training- training is available from experienced Dando engineers.
Towing the Dando 2500
Dando 2500, UK Site Investigation
Dando 2500 at Geotechnica Exhibition