A powerful geotechnical drilling rig, the Geotec 10 is able to undertake all types of geotechnical investigation including coring and sampling. It can also deploy other drilling techniques including water well drilling, auger drilling and geothermal drilling.

Geotec 10- Specification

PDF download- Click here

Carrier Vehicle: 6x6 heavy duty truck. Options: crawler & tractor

Power Unit: 102HP diesel engine

Drilling Capacity: Pullback: 10,000kg. Pulldown: 7,500kg. Hook load(max): 10,000kg

Mast Dimensions: Working Mast Height: 9,140mm. Working Stroke: 7,600mm

Rotary Head Carriage Performance: Fine feed rate:10m/min. Fast feed rate: 30m/min. Hoist rate (max): 25m/min

Rotary Head Performance*: Speed (max): 750rpm. Torque (max): 12,050Nm. 

Circulating Swivel Unit: Internal Diameter: 51mm. Operating pressure(max): 600psi

Breakout & Clamps: Min clamping diameter: 60mm. Max clamping diameter: 220mm. Load suspending capacity: 10,000kg

Main Winch*: Hoist (single line, bare drum): 3,700kg. Speed (single line, bare drum): 27m/min. Drum capacity: 83m @ 12mm

Tool Handling Winch: Hoist (single line, bare drum): 2,000kg. Speed (single line, bare drum): 40m/min. Drum capacity: 57m @ 10mm

Coring Pump*: Flow rate (max):138/m. Discharge pressure: 700psi

In Line Oiler: Fitted to assist DTH operations

Control: Hydraulic Power circuit based on load sensing, proportional valves. Drilling controls available from driller’s control console.

Levelling Jacks: Two front and two rear

Rig Lighting: Fitted as standard

Hydraulic Free-Fall Winch: Optional

Maximum Drilling Depths**:

3 1/2" (13.5kg/m) drill rods: 592m

NWY (8.0kg/m) drill rods: 1,020m

*other options available

**calculated from the weight of drill rods only and using 80% of the rig's pullback

Make Enquiry