Region +44 (0) 1903 731312

Watertec 24 Water Well Drilling Rig

With a pullback capacity of 24,000kgf, the high performance Watertec 24 water well drilling rig is capable of drilling to great depths while mounted on a 6 x 6 truck.

The machine is built to be robust, reliable and able to operate for continuous periods in some of the world’s harshest environments. A 900cfm/350psi compressor is mounted on board as standard and provides air for DTH hammer drilling and well development.

Favoured by government, NGOs, charities and contractors where greater depths are required in arid areas, or for larger diameter bores required for irrigation or larger scale water supply where highly productive aquifers are present.

Download Brochure
Carrier Options Heavy duty commercial 6 x 6 truck - Crawler mounted - Trailer mounted - Mounted on customer own support vehicle/structure
Deck Engine Caterpillar C15 580 HP diesel engine standard, other options available.
Mast Dimensions Working mast height using main winch: 9140mm
Working mast using the rotary head: 7600mm
Rig Capacity Pullback: 24000kg
Pulldown: 14000kg
Hook load (max): 24000kg
Rotary Head Performance Rotation (max) 192rpm
Torque (max) 8850Nm
Other options available
Rotary head tilt and side shift
Drill Table and Break Out System As standard - Box type drill table with removable drill rod and casing guides. Break out system is a double acting hydraulic cylinder with adjustable wrench.
Other options available
Standard Compressor Doosan XHP 900 (900CFM/350psi)
Other options available
Main Winch Maximum single line pull: 8000kg
Maximum speed: 27m/minute
Drum capacity: 83m of 18mm wire rope
Tool Handling Winch Maximum single line pull: 2040kg
Maximum speed 40m/minute
Drum capacity: 57m of 12mm wire rope
Mud Pump Standard: Hydraulically driven: 7-1/2" x 8" duplex mud pump
Maximum flow rate: (420gpm) 1590 litres/minute
Maximum discharge pressure: 182psi
Foam Pump Standard: Hydraulically driven duplex pump
Maximum flow rate: 34 litres/minute
Maximum discharge pressure: 750psi
Inline Oil Lubricator Fitted as standard and used when operating a DTH hammer
Hydraulic System Hydraulic power circuit based on load sensing hydraulic pumps and proportional control valves
Drillers Control Panel Uncomplicated and user friendly with ergonomic layout
Levelling Jacks Two front and two rear extendable jacks with individual locking valves
Lighting and Electrical System Rig is provided with mast and control panel lighting and the electrical system is 24 volt
  • Designed to be robust and reliable for working in tough environments
  • Capable of mud rotary, air and flooded reverse drilling
  • Various mounting options including 6×6 or 8×8 truck; crawler unit; trailer; customer own support vehicle or structure
  • High torque rotary head
  • High pressure air/water swivel
  • Main winch for tools and casing
  • Auxiliary winch for tool handling
  • Selection of on-board air compressors
  • Selection of on-board mud pumps
  • Can be supplied with complete tooling package
3-1/2" (13.5kg/m) drill rod 1422m (4665ft)
4-1/2" (23kg/m) drill rod 835m (2740ft)

* Depths stated are theoretical and based on 80% capacity of the machine. Depths achieved will depend on variables including ground conditions and capability of crew operating the machine.

  •  Drilling Conversion Kit – For reverse circulation drilling and flooded reverse drilling applications
  • Pipe Handling Boom Crane – For loading and unloading drill pipe and light site work
  • Rod Spin Safety Guard – Optional – Other Options available on request

Watertec 24 Water Well Drilling in Kurdistan, Iraq


UN Water Well Drilling Project in Sudan


Truck Mounted Watertec 24 in Ethiopia



Join our newsletter