Carrier Vehicle: 4x4 heavy duty truck, new or used.

Power Unit: Caterpillar C15 diesel engine.

Drilling Capacity: Pullback: 10,000kg. Pulldown: 7,500kg. Hook load(max): 10,000kg

Mast Dimensions: Working Mast Height: 9,140mm. Working Stroke: 7,600mm

Rotary Head Carriage Performance: Fine feed rate: 10m/min. Fast feed rate:30m/min. Hoist rate (max): 25m/min.

Rotary Head Performance*: Speed (max): 190rpm. Torque (max): 8,850Nm.

Circulating Swivel Unit: Internal Diameter: 51mm operating pressure(max): 600psi

Breakout Cylinder: Type:Double acting positive displacement ram. Torque to be applied to drill string (max): 20,805Nm

Main Winch: Hoist (single line, bare drum): 3,700kg. Speed (single line, bare drum): 27m/min. Drum capacity: 83m @ 12mm

Tool Handling Winch: Hoist (single line, bare drum): 2,040kg. Speed (single line, bare drum): 40m/min. Drum capacity: 57m @ 12mm

Foam Injection Pump*: Flow rate (max):34l/m. Discharge pressure: 750psi

On Board Flush (mud) Pump*: Type: 6"x5" duplex piston pump.  Flow rate (max): 568l/m. Discharge pressure (max): 310psi

Compressor*: Type: multistage rotary screw type compressor powered by the rig's power unit. Flow rate (max): 900cfm. Discharge pressure (max): 350psi

In Line Oiler: Fitted to assist DTH operations

Control:Hydraulic Power circuit based on load sensing, proportional valves. Drilling controls available from driller’s control console.

Levelling Jacks: Two front and two rear

Rig Lighting: Fitted as standard

Maximum Drilling Depths**:

3 1/2" (13.5kg/m) drill rods: 593m

4 1/2" (23kg/m) drill rods: 348m

*other options available

**calculated from the weight of drill rods only and using 80% of the rig's pullback