Watertec 6
The Watertec 6 is a lightweight high performance rotary drilling rig for conventional open hole drilling using mud/air/water flushing techniques and with DTH hammer capability, coring, augering etc. This machine is highly manoeuvrable, simple to position and very easy to operate.
It is a superb example of design engineering combining the reliability required for rugged on-site use with ease of operation and maintenance.The machine can be fitted with optional ancillaries such as a small centrifugal self-priming mud pump, air line lubricator, foam pump etc. The Watertec 6 is the ideal rotary machine for accessing remote locations and offering versatile well drilling within the budgets of many organisations.
Carrier Vehicle: 4x4 heavy duty truck, new or used. Dual axle trailer Mast Dimensions: Working Mast Height: 5,400mm. Working Stroke: 4,500mm Rotary Head Performance*: Speed (max): 190rpm. Torque (max): 4,050Nm. Breakout Cylinder: Type:Double acting positive displacement ram. Torque to be applied to drill string (max): 18,500Nm Main Winch*: Hoist (single line, bare drum): 2,000kg. Speed (single line, bare drum): 40m/min. Drum capacity: 57m @ 12mm Tool Handling Winch: Hoist (single line, bare drum): 1,300kg. Speed (single line, bare drum): 15m/min. Drum capacity: 30m @ 8mm Foam Injection Pump*: Flow rate (max):34l/m. Discharge pressure: 750psi On Board Flush (mud) Pump*: Type: Centrifugal type powered by rig's on-board power plant. Flow rate (max): 454l/m. Discharge pressure (max): 140psi In Line Oiler: Fitted to assist DTH operations Control:Hydraulic Power circuit based on load sensing, proportional valves. Drilling controls available from driller’s control console. Levelling Jacks: Two front and two rear Rig Lighting: Fitted as standard Maximum Drilling Depths**: 3 1/2" (13.5kg/m) drill rods: 356m 4 1/2" (23kg/m) drill rods: 209m *other options available **calculated from the weight of drill rods only and using 80% of the rig's pullback
Power Unit: 80HP 6 cylinder diesel engine.
Drilling Capacity: Pullback: 6,000kg. Pulldown: 3,500kg. Hook load(max): 6,000kg
Circulating Swivel Unit: Internal Diameter: 51mm operating pressure(max): 600psi