Carrier Vehicle: TYPE: 6x6 heavy duty truck -- SWL: 33,000kg

Power Unit: Caterpillar C13 Diesel Engine

Drilling Capacity: Pullback: 10,000kg -- Pulldown: 7,500kg -- Hook Load (max):
10,000kg

Drilling Dimensions: Working Mast Height: 9,140mm -- Working Stroke: 7,600mm

Rotary Head Carriage Performance: Fine Feed Rate: 10m/min -- Fast Feed Rate: 30m/min -- Hoist Rate (max):25m/min

Rotary Head Performance: Speed (max) 190 rpm -- Torque (max): 9,450Nm

Circulating Swivel Unit: Internal Diameter: 51mm --  Operating Pressure (max): 600psi

Breakout Cylinder: Type: Double acting positive displacement ram -- Torque to be applied to drill
string (max): 13,557Nm

Main Winch: Hoist (single line, bare drum): 3,700kg -- Speed (single line, bare drum): 27 m/min -- Drum Capacity: 83m @ 12mm

Aux. (tool handling) Winch: Hoist (single line, bare drum): 2,040kg -- Speed (single line, bare drum): 32 m/min

Water/Foam Pump: Flow rate (max): 34l/m -- Discharge Pressure: 750psi |

On board Flush (mud) pump: Type: 6”x5” Duplex Piston Pump -- Flow rate (max): 568l/m -- Discharge
Pressure (max): 310psi

Compressor: Type: multistage rotary screw type compressor powered by the rig’s power unit -- Flow (max): 750cfm --  Discharge Pressure (max): 350psi

In line Oiler: Fitted to assist DTH operations

Control: Hydraulic Power circuit based on load sensing, proportional valves -- Drilling controls available
from Driller’s control console

Leveling Jacks -- Two Front and Two Rear

Rig Lighting -- Fitted as Standard