Region +44 (0) 1903 731312

Watertec 9000 Water Well Drilling Rig

This medium depth water well rig is capable of performing a range of drilling methods including mud rotary, DTH hammer and flooded reverse circulation.

The compact, robust Dando Watertec 9000 boasts a pullback of 10,000kgf and is available with various mounting options including crawler, truck, trailer and skid.

Features include:

  • Truck mounted as standard, but also available on tracks, skid or customer’s own support vehicle.
  • High-torque, high-speed rotary head with hydraulic side shift and head tilt
  • Hydraulic winch
  • Hydraulic rod clamps/breaker available as an option
  • Safe hands-free pipe handler eliminates the need of physical lifting and manipulation of drill rods
  • Selection of mud pumps available
  • Foam injection pump
  • Inline oil lubricator

*Please request a copy of our terms and conditions if required.

Download Brochure
Carrier Options Heavy duty commercial 4 x 4 truck - Crawler mounted- Trailer mounted - Mounted on customer own support vehicle/structure/skid
Deck Engine Standard fitting: CAT C4.4 turbo diesel engine 102hp (142hp available as an option)
Mast Dimensions Working mast height using main winch: 5500mm
Working mast stroke using the rotary head: 3600mm
Mast Capacity Pullback: 10000kg
Pulldown: 3250kg
Hook load (max): 10000kg
Rotary Head Performance Rotation (max) 436rpm
Torque (max) 6000Nm
Rotary head tilt and side shift (as standard)
Other options available
Drill Table and Break Out System As standard - Box type drill table with removable drill rod and casing guides.
Break out system is a double acting hydraulic cylinder with adjustable wrench.
Other options available
Main Winch Maximum single line pull: 2040kg
Maximum speed: 41m/minute
Drum capacity: 57m of 10mm wire rope
Tool Handling Winch Maximum single line pull: 1326kg
Maximum speed: 15m/minute
Drum capacity: 30m of 8mm wire rope
Mud Pump Hydraulically driven 5” x 6” duplex mud pump or centrifugal mud pump
Maximum flow rate: (150gpm) 568 litres/minute
Maximum discharge pressure: 310psi
Foam Pump Standard: Hydraulically driven duplex pump
Maximum flow rate: 34 litres/minute
Maximum discharge pressure: 500psi
Inline Oil Lubricator Fitted as standard and used when operating a DTH hammer
Hydraulic System Hydraulic power circuit based on load sensing hydraulic pumps and proportional control valves
Drillers Control Panel Uncomplicated and user friendly with ergonomic layout
Rod Spin Safety Guard Various options available
Levelling Jacks Two front and two rear jacks with individual locking valves
Lighting and Electrical System Rig is provided with mast and control panel lighting. Electrical system is 12 volt
4-1/2” (25kg/m) drill rod 320m (1050ft)
3-1/2” (13.5kg/m) drill rod 593m (1946ft)

* Depths stated are theoretical and based on 80% capacity of the machine. Depths achieved will depend on variables including ground conditions and capability of crew operating the machine.

  • Deck mounted drill rod rack
  • On-board storage
  • Other options available

Water Supply & Irrigation in Indonesia

One of Two Watertec 9000s set for Indonesia

Eighteen Trailer Mounted Watertec 9000 Rigs Supplied to Indonesia

NGO's Watertec 9000 Drilling Wells in Burkina Faso

Watertec 9000 Water Well Rig with Extra Storage

Join our newsletter